Free lesson

Why Every Map Lies (and How to Read One Anyway)

Why Every Map Lies (and How to Read One Anyway) — How the Earth Works: Geography for the Curious, From Your Address Down. Estimate the size first; A sphere cannot be flattened without distortion; Mercator: a useful projection for a specific job; A straight map line and a shortest route are different; Reading height on a flat map; Check the map before…

Demo edition. The materials are undergoing editorial review.

Topics covered

  • Estimate the size first
  • A sphere cannot be flattened without distortion
  • Mercator: a useful projection for a specific job
  • A straight map line and a shortest route are different
  • Reading height on a flat map
  • Check the map before drawing a conclusion
  • Worked map diagnosis

Estimate the size first

Picture a familiar world map and estimate how many times Greenland would fit inside Africa. On a Mercator map they may look nearly equal, yet Africa covers about 30 million km² and Greenland about 2.2 million km². Africa is therefore roughly 14 times larger.

This is not a failure of attention. A flat map transforms Earth’s curved surface and inevitably distorts something. By the end of this lesson, you will be able to identify what a map preserves, decide which comparisons it supports, and explain why a shortest route can look curved on it.

A sphere cannot be flattened without distortion

Try pressing a whole orange peel flat on a table. It must tear, wrinkle, or stretch. In the same way, a map projection uses mathematical rules to transfer points from a curved surface to a plane, but it cannot preserve area, distance, direction, and shape perfectly at the same time.

An equal-area projection keeps area ratios correct but changes shapes. An equidistant projection keeps distances only from a chosen point or along specified lines. A conformal projection preserves local angles and the shapes of small features but changes areas. A compromise projection distributes several kinds of distortion. The useful question is therefore: “What does this map preserve, and what does it sacrifice?”

Mercator: a useful projection for a specific job

Gerardus Mercator published his projection in 1569. A rhumb line—a route with a constant compass bearing—appears straight on it. That was useful to mariners, although such a straight line is usually not the shortest route.

The projection is conformal: it preserves local angles well, but its scale grows with distance from the equator. In the spherical model, at latitude 60° the linear scale factor is 1/cos(60°) = 2, so area appears enlarged by roughly 2 × 2 = 4. The poles cannot be displayed because the scale tends toward infinity there. This is why Greenland, Canada, and northern Eurasia look excessively large on a Mercator world map. Russia really covers about 17 million km², but Africa is nearly twice as large.

Web maps commonly use Web Mercator for seamless zooming and convenient street display. That does not make it suitable for comparing world areas. For that job, choose an equal-area projection such as Equal Earth; a compromise projection may suit a general reference map. A common mistake is to call Mercator a “wrong map” without naming the task.

A straight map line and a shortest route are different

On a sphere, the shortest surface route between two points follows the shorter arc of a great circle—a circle whose plane passes through the sphere’s center. On a Mercator map, that arc usually looks curved, while a straight line represents a constant compass bearing and is often longer.

In an explicitly fictional example, a passenger sees a Madrid–New York route bend north and assumes it is a detour. A taut thread placed between the cities on a globe also shifts north: the flat picture is curved, not the shortest spherical route. A real flight may depart from the great-circle path because of winds, weather, airspace, or other operating constraints. The geometric minimum is therefore not a prediction of the actual track.

Reading height on a flat map

Contour lines join points of equal elevation. The contour interval gives the elevation difference between adjacent lines. If the interval is 10 m, crossing five intervals means an elevation change of 5 × 10 = 50 m. Closely spaced contours indicate a steep slope; widely spaced ones indicate a gentle slope. Closed lines that become smaller toward the center usually show a hill. Where contours cross a stream, their V shape points upstream, toward higher ground.

Hypsometric tints show elevation bands with color, but the legend defines what each color means. On many physical maps, green means low ground rather than vegetation; a green area can still be desert. A terrain layer can help explain why a road bends, but terrain alone does not establish the cause of flooding or another hazard.

Check the map before drawing a conclusion

First name the task: comparing areas, navigating locally, measuring distance, or reading terrain. Then find the projection, scale, units, and contour interval in the legend or notes. Area comparisons need an equal-area map. Local directions and angles may benefit from a conformal one. Do not measure distance with an ordinary ruler when scale varies across the map.

On a Mercator world map, check latitude: the nearer a feature is to a pole, the more its area is inflated. For a long route, compare the map with a globe or a great-circle tool. Also keep the symbol separate from the thing represented: color, line thickness, and symbol size mean what the legend says they mean.

Worked map diagnosis

Consider an explicitly fictional news map with two forest zones shaded alike, one near the equator and one at 60° N. If the base is Mercator, their visible areas cannot be compared directly: near 60°, mapped area is enlarged by roughly four times relative to the equatorial scale. The proper next step is to find the underlying numerical areas or reproject the data onto an equal-area map.

If the same map has a scale bar valid at only one latitude, do not apply it everywhere without checking. If the projection is unnamed, make a limited conclusion: the map shows where the zones are, but it does not support a reliable visual comparison of their areas. That is more precise than declaring the entire map false.

Practical assignment

Audit one map

Continue to learning

Course outline

  1. Your Place Passport: Where You Really Are on the Planet
  2. Why Every Map Lies (and How to Read One Anyway)
  3. Continents on the Move: The Idea That Explains the Planet
  4. What's Inside the Earth — and How We Know Without Going There
  5. Mountains, Stones and Deep Time
  6. Earthquakes: Why, Where, and What to Do
  7. Volcanoes and Tsunamis: Where, Why, and How to Stay Safe
  8. The World Ocean: Five Oceans and a Barely Mapped Floor
  9. Ocean Currents: The Planet's Heat Conveyor
  10. Water on the Planet: Where It Is and Where It Flows
  11. The Atmosphere: Earth's Thin Blanket
  12. Weather: Highs, Lows, Fronts and How to Read a Forecast
  13. Extreme Weather: Hurricanes, Thunderstorms and Heat
  14. Climate Zones: Why Palm Trees Don't Grow in Oslo
  15. A Changing Climate: What Has Been Measured
  16. Planet News: Check the Headline, Skip the Panic